Design and Construction
What is the difference between an Omega WallbedTM and a Murphy Bed?
A Murphy bed consists of a metal framework that is secured to the floor and folds up into a cabinet or closet. Omega WallbedsTM consist of a well crafted wooden bed box that hold the mattress and foundation utilizing a high end spring loaded mechanism that is mounted to the cabinetry or sides of the wallbed system. The wallbed unit is securely attached to studs in the wall thereby causing no damage to the hardwood or cement floor of the home.
[Top]
How much customer design preferences factor into an Omega WallbedTM system?
Our goal at Omega WallbedsTM is to provide a wallbed system that is not only beautiful but also serves as a functional part of your home. Our designers will work with you to provide exactly the wallbed system that fit your requirements.
[Top]
How custom is “custom”? Am I limited to specific sizes or cabinet arrangements?
Since we build to standard bedding sizes, the only size constraints are the dimensions of the wallbed. All other components are built to fit your specifications and the amount of space you wish to occupy.
[Top]
What size beds do you make?
We offer Twin, Double (Full) and Queen size wallbeds.
[Top]
Where are Omega WallbedsTM built?
We build all our wallbed systems and cabinets in the same factory/showroom we have occupied since 1979. We support our local economy by purchasing most of our materials from local vendors.
[Top]
If we move, can we take the wallbed with us?
Omega WallbedsTM can be easily disassembled and moved to a new location. Call our office and inquire about how we can assist you in moving your wallbed.
[Top]
What makes the mechanism so special? Is it hydraulic or spring loaded?
Omega WallbedsTM utilize a high end spring mechanism which uses the weight of the mattress to assist to open and close the wallbed easily. Our models also include a leg bar which not only holds the mattress in place while the bed is up, it also allows for the simultaneous movement of both legs when lowering the bed.
[Top]
Do you make wallbeds that open and close electronically
Not at this time.
[Top]
What materials are available?
We primarily use Oak, Birch, Knotty Pine and Knotty Alder for our wallbeds and cabinets. We also have a selection of laminates available.
[Top]
Does Omega WallbedsTM use solid wood, plywood, or compressed board in their wallbed construction?
Our wood products use furniture grade ¾” veneered plywood in all our construction and solid wood for our trim. Our laminates have a melamine core and are supplemented with plywood in the stress areas.
[Top]
Ordering / Pricing
What price range do Omega WallbedsTM run
The price of a wallbed system is determined by a number of factors: material, style, size, components, etc. Stop by our showroom and our sales people will be happy to provide a quote for the exact system you need.
[Top]
Are Estimates, Delivery and Installation extra?
Our sales representatives will gladly arrange for someone to come out and measure the room where you are considering placing the wallbed system at no charge to you. If you plan on filling up a wall, our representatives will come and measure the room to ensure proper component construction. Unless otherwise noted, all prices include delivery and installation.
[Top]
Can I place an order Online?
Due to the wide selection of styles and configurations, we do not offer the selection of prefabricated units online. We welcome you to our showroom Monday through Saturday 10:00 am to 4:00 pm.
[Top]
What are your payment options?
We will need a 50% deposit at the time of order with the balance paid on installation. We accept Cash, check, Visa or Master Card.
[Top]
Installation
How soon after I place an order can I expect to have my wallbed installed?
Since our units are custom built, depending on the complexity of the wallbed system, it takes approximately 8 weeks from placing the order to installation.
[Top]
What preparations are necessary prior to delivery and installation of our wallbed system?
Our installers are equipped to install and do limited modifications to the wallbed system, but are not equipped to handle any major remodeling or rewiring. The room where the wallbed is to be installed should be relatively free from obstructions such as furniture, boxes, etc.
Since our installers will be making frequent trips in and out of your home during the installation, any pets you do not wish to escape to the outside should be secured.
[Top]
How are the wallbeds attached?
Unlike Murphy beds which are usually attached to the floor, Omega WallbedsTM are securely attached to studs in the wall or anchored to block or concrete walls. No attachments are made to the floor thereby leaving any tile, hardwood flooring or carpeting undamaged.
[Top]
How long does it take to install a wallbed system?
Installation time will vary depending on the size of the system and the complexity of the design; but generally range from 1-2 hours.
[Top]
Where does Omega WallbedsTM deliver?
While our main delivery area centers around the Tucson metropolitan area, we routinely deliver to Rancho Vistoso, Splendido, Saddlebrook, Oro Valley, Sahuarita, Green Valley, Sierra Vista, Benson and Willcox Arizona and all points in between. We can also make arrangements to ship out of state if necessary.
[Top]
Bedding
How comfortable is the wallbed?
Our standard mattress is a mid-firm quality mattress suitable for everyday use. Since our mattresses provide superior comfort over a fold-out bed, your guests may choose to extend their stay with you.
[Top]
Does Omega WallbedsTM use standard sized mattresses and box springs
The mattresses in all Omega Wallbeds are locally made standard sized mattresses. Instead of a box spring, we use a smaller foundation that provides support for the mattress and distributes the weight over the bedface.
[Top]
Can I use my own mattress?
While we offer comfortable bedding with all our wallbeds, you are not obligated to purchase our mattresses. Since our wallbeds are built to standard size bedding, we can utilize an existing mattress or you may purchase one separately.
[Top]
If I buy my own mattress, are there any restrictions?
Our wallbeds are built assuming an 9 ½ ” mattress and a 4” foundation with an overall height of 13 ½”. If your mattress exceeds 9 ½”, (i.e. pillow-tops), we can adjust the depth of the wallbed unit to accommodate the increased height. The mattress height can be verified at the time we measure the room.
[Top]
Operation / Function
How easy is it to open and close the bed
The mechanism used on all Omega WallbedsTM provides sufficient support to allow one handed operation to open and close the wallbed easily. Our installers will adjust the mechanism to suit your personal needs.
[Top]
Can I use the bed every day?
The construction of the wallbed, the reliability of the mechanism and the comfort of the mattress combine to make the wallbed suitable for everyday use: an excellent solution for maximizing the space in studio apartments.
[Top]
Can I leave the bed made and still close the bed?
The bed can be left made up with sheets and a light blanket and still close without any problems. Pillows and thick comforters should be removed prior to closing in order to prevent problems with the headboard and the wall.
[Top]
